当前时间:
收藏本站  | 设为首页
石永军
发布时间:2015-11-03 浏览次数:

点击查看原图  

石永军,男,博士,教授,博导,机电工程学院副院长,主管本科教学工作。

机械设计与车辆工程系

办公电话:0532-86983304

通讯地址: 青岛经济技术开发区长江西路66

电子邮件: syjgl@126.com

教育及工作经历:

1991.91995.7,中国石油大学(华东)机械制造工艺与设备专业,获工学学士学位;

1995.82000.8,垦利石化有限责任公司工作,技术员;

2000.92003.7,中国石油大学(华东)机械设计及理论专业,获工学硕士学位

2003.92007.3,上海交通大学机械制造及其自动化专业毕业,获工学博士学位;

2007.3年至今在中国石油大学(华东)机电工程学院机械设计与车辆工程系工作。

教学工作及教学研究:

主要从事车辆工程和机械基础课程的教学工作。开设的课程有《汽车构造与设计》、《车载设备设计》、《机械原理》、《机械设计基础》、《现代设计方法》等。

先后指导本科生参加国家大学生创新试验计划(国家级)4项,大学生创新训练计划(校级)7项,其中,指导的作品新型高能摩擦制动器的设计获第八届全国大学生创新创业年会获评我最喜爱的项目最佳创意项目

指导学生参加挑战杯、山东省机电杯大学生机电产品创新设计竞赛等比赛获奖30余项。

·科研工作及学术研究:

先后主持或参与国家自然科学基金、863项目、山东省自然科学基金、中国石油科技创新基金项目、山东省科技发展计划等省部级项目十余项,发表科研论文三十余篇,其中被SCI收录25篇,并申请发明专利12项,已授权7项。

·代表性论文

1.Yongjun Shi, Chen Zhang, Guidong Sun, Chuanxiu Li. Study on reducing edge effects by using assistant force in laserforming. Journal of Materials Processing Technology, 2016, 227: 169-177(SCI&EI收录).

2. Li Chengkai, Liu Yancong, ShiYongjun, et al. Modelling of high-frequency induction heating surface cladding process: numerical simulation, experimental measurement and validation. International Conference on Industrial Engineering and Information Technology201497-101 ( EI收录).

3. Liu Yancong, Li Chengkai, Xie Jianghao, Shi Yongjun, et al. Simulation on the high frequency induction cladding and experimental validation. Journal of Information & Computational Science, 2015, 12(2): 641-656 ( EI收录).

4. Yi Peng, Xu Pengyun, Fan Changfeng, Yang Guanghui, Liu Dan, and Shi Yongjun. Microstructure formation and fracturing characteristics of grey cast iron repaired using laser, Sci. World J. 2014, 541569:1-10 (SCI&EI收录).

5. Shi Yongjun, Lu Xianfa, Yi Peng and Liu Zhongyan. Effect of heating paths on strain distribution of plate in laser forming. Int J Adv Manuf Technol, 2013, 66(1-4):515-521 (SCI&EI收录).

6. Shi Yongjun, Lu Xianfa, Liu Yancong and Yi Peng. Forming accuracy analysis of plate in multi-scanning laser bending process. Proc. J. Pro. Mech Eng., 2013, 227(3): 225-228 (SCI&EI收录).

7. Shi Yongjun, Yi Peng and Hu Jun. Effects of process parameters on forming accuracy for the case of a laser formed metal plate. Lasers in Engineering. Lasers in Engineering, 2013, 26(5-6): 295-310 (SCI&EI收录).

8. Shi Yongjun, Liu Yancong, Yi Peng et al. Effect of different heating methods on bending deformation of metal plate under upsetting mechanism in laser forming. Optics & Laser Technology, 2012, 44(2): 486-491 (SCI&EI收录).

9. Shi Yongjun, Hu Jun and Dong Chengli. Analysis of geometric effect on forming accuracy in laser forming. Proc IMechE Part B: Journal of Mechanical Engineering Science, 2011, 225(10): 1792-1800 (SCI&EI收录).

10. Yi Peng, Liu Yancong, Shi Yongjun et al. Effects analysis of ambient conditions on process of laser surface melting, Optics & Laser Technology, 2011, 43(8): 1411–1419 (SCI&EI收录) .

4. Yi Peng, Liu Yancong, Shi Yongjun, et al. Analysis and prediction of workpiece size effects in laser surface melting process, Advanced Science Letters, 2011, 4(4-5): 1312-1317 (SCI收录) .

11. Shi Yongjun, Chen Jun, Qi Yaoguang, et al. Processing strategy for laser forming of complicated singly curved shapes. Materials Science and Technology, 2009, 25(7):925-930SCI&EI收录).

12. Shi Yongjun, Liu Yancong, Yao Zhenqiang, et al. A study on bending direction of sheet metal in laser forming. Journal of Applied Physics, 2008, 103(5), 053101 (SCI&EI收录).

13. Shi Yongjun, Yao Zhenqiang, Liu Feng, et al. Numerical investigation on laser-produced microstructure of metal under non-melting condition. Applied Surface Science, 2008, 254(22): 7421-7427 (SCI&EI收录).

14. Ying Jin, Jian Hua Wu, Yong Jun Shiet al. Research on the Mechanisms of Laser Forming for the Micro-Structural Element. Materials Science Forum, 2008, 575-578:1145-1150 ( EI收录)

15. Shi Yongjun, Shen Hong, Yao Zhenqiang, et al. An analytical model based on the similarity in temperature distributions in laser forming. Optics & Lasers in Engineering, 2007, 45(1): 83~87 (SCI&EI收录).

16. Shi Yongjun, Shen Hong, Yao Zhenqiang, et al. Temperature gradient mechanism of laser forming for thin plates. Optics & Laser Technology,2007, 39 (4): 858-863 (SCI&EI收录).

17. ZQ Yao, H Shen, YJ Shi, J Hu. Numerical study on laser forming of metal plates with pre-loads. Computational Materials Science, 2007, 40(1): 27-32. (SCI&EI收录)

18. H Shen, J Zhou, YJ Shi, ZQ Yao, J Hu. Varying velocity scan in laser forming of plates. Materials Science and Technology, 2007, 23(4): 483-486. (SCI&EI收录)

19. Shi Yongjun, Yao Zhenqiang, Shen Hong, et al. Research on the mechanisms of laser forming for the metal plate. International Journal of Machine tools & Manufacture, 2006, 46(12-13): 1689-1697 (SCI&EI收录).

20. Shi Yongjun, Shen Hong, Yao Zhenqiang, et al. Application of similarity theory in the laser forming process. Computational Materials Science, 2006, 37(3): 323-327 (SCI&EI收录).

21.Shi Yongjun, Shen HongZhenqiang Yao. Numerical investigation of straight-line laser forming under the temperature gradient mechanism. Acta Metallurgica Sinica, 2006, 19(2):144-150 (EI收录).

22. Shen Hong, Shi Yongjun and Yao Zhenqiang. Numerical simulation of the laser forming of plates using two simultaneous scans. Computational Materials Science, 2006, 37(3): 239-245(SCI&EI收录).

23. Shen Hong, Shi Yongjun, Yao Zhenqiang. Laser forming of plates using two sequent scans of different intervals. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 2006, 220(4): 507-511 (SCI收录)

24. Shen Hong, Shi Yongjun, Yao Zhenqiang, et al. Fuzzy logic model for bending angle in laser forming. Materials Science and Technology, 2006, 22(8): 981-986 (SCI&EI收录).

25. H Shen, YJ Shi, ZQ Yao, J Hu. An analytical model for estimating deformation in laser forming. Computational Materials Science, 2006, 37(4): 593-598. (SCI&EI收录)

26. H Shen, Z Yao, Y Shi, J Hu. An analytical formula for estimating the bending angle by laser forming. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2006, 220(2): 243-247. (SCI&EI收录)

27. Shi Yongjun, Shen Hong, Yao Zhenqiang, et al. Edge effects of metal plate in laser forming. Transactions of Nonferrous Metals Society of China, 2005, 15(3): 260-263 (SCI收录).

28. Shen Hong, Shi Yongjun, Yao Zhenqiang, et al. Analysis of varying velocity on the edge effects in laser bending. Transactions of Nonferrous Metals Society of China, 2005, 15(3): 255-259 (SCI收录).

29. 石永军, 刘衍聪, 胡俊. 基于塑性应变场单曲率面板材激光热成形工艺规划研究. 中国机械工程2011, 22(12): 1493-1497

30. 伊鹏, 刘衍聪, 石永军等. 铸铁表面激光熔凝行为及温度场数值模拟. 焊接学报, 2011, 32(8): 81-84 (EI收录).

31. 石永军, 刘衍聪, 姚振强等. 双曲率复杂型面激光热成形工艺规划研究. 中国激光, 2010, 37(2): 586-592. (EI收录)

32. 伊鹏; 刘衍聪; 石永军等. 基于改进自适应遗传算法的海洋平台管路优化设计方法. 中国海上油气, 2010, 22(2): 134-138

33. 伊鹏, 刘衍聪, 石永军. 造斜段弯曲钻柱非线性动力学分析与仿真. 中国石油大学学报(自然科学版), 2010, 6: 129-135 (EI收录).

34. 石永军, 刘峰, 綦耀光等. 激光热成形工艺中加热位置对板材变形的影响. 中国激光, 2008, 35(7): 1087-1090 (EI收录).

35. 石永军, 杨民, 贠平利等. 金属板材激光热成形非期望变形的数值模拟研究. 中国激光, 2008, 35(11): 1825-1829 (EI收录).

36. 石永军,白立剑,伊鹏. 新型石油钻杆液压矫直机结构分析, 石油矿场机械, 2013, 42(4): 57-60

37. 相恒富; 张立军; 石永军. 基于LSSVM的直线电机进给定位误差补偿研究. 机械工程师, 2008, 4:49-51

38. 石永军,姚振强,沈洪. 激光热应力板料成形角变形分析. 南京航空航天大学学报, 2005, 37(nSUPPL): 99-103 (EI收录)

39. 石永军,沈洪,姚振强等. 激光热成形温度场和变形场相似性研究. 光电子·激光, 2006, 17(8): 1018-1021 (EI收录)

40. 沈洪,石永军,姚振强等. 板材激光直线扫描弯曲角度的解析模型. 上海交通大学学报,200640(9): 1525-1528 (EI收录)

41. 石永军,姚振强,沈洪. 激光弯曲成形机理及扫描路径规划研究. 中国科协第二届优秀博士生学术年会论文集. 北京:中国科学技术出版社,2004pp.736-740.

·主要研究领域:

激光热加工技术、石油机械设计


地址:青岛经济技术开发区长江西路66号  邮编:266580
联系电话(传真):0532-86983300  电子邮箱:jdkyb@upc.edu.cn  [后台管理]